20000mAh Portable Car Jump Starter Power Bank Vehicle Battery Charger Engine 12V
Size : 131 x 75 x 25mm
Bare weight : 280g
Complete weight : 750-800g
Input: DC5V/2A
Output : USB2.0 DC 5V/2A; 12V
Charging time : 5 hours or so
Starting current : 200A
Peak current : 400A
Number of uses : >1000 times
Operating temperature : -25 ° C -60 ° C
Type of battery : Soft Case
Shell material : plastic
Battery capacity : 8000 mAh external standard 20000 mAh
Colour : white
How To Use Our Product Start A Car?
Important Attention : For Car Jump Start
1. For jump start your car,please first checke your car's displacement to make sure it can use.
2. If you car's battery is good and you just want to test this emergency battery.Please do below 2.1 to 3
2.1. Lossen the screws on your car's battery,just need lossen one pole
2.2. Connect red clamp to positive wire,black clamp to negative wire. Please make sure there is enough contact surfaces.
2.3. Plug into battery hole, please plug into the end
3. Prees the round power buttoon,and go to your car to start.
4. After start your car ,please take off the clamp in 30S.
Note: IF You Car's Battery Is Good And You Don't Do The Step 2.1 ,It May Cause Battery Damage
How To Use Our Product Charging/Power Supply To Your 5V Device (Smartphone/Tablet/PSP/Mp3)?
1. Make sure there is at least one power indicator lighting on the power bank
2. Choose a right connector,and connect to the device
3. Connect the power bank(5V/2A will charge quickly)
4. Press the round button
How To Use Our Product's High Quality Led Light Torch Function?
1. Make sure there is at least one power indicator lighting on the power bank
2. Long press the power button about 3 secs
3. Then you can press power button to change mode(SOS/Fast flashing/Lighting)
How To Charge This Power Bank?
You can use car charger or AC charger to charge this jump starter.
20000mAh Portable Car Jump Starter Power Bank Vehicle Battery Charger Engine 12V
Size : 131 x 75 x 25mm
Bare weight : 280g
Complete weight : 750-800g
Input: DC5V/2A
Output : USB2.0 DC 5V/2A; 12V
Charging time : 5 hours or so
Starting current : 200A
Peak current : 400A
Number of uses : >1000 times
Operating temperature : -25 ° C -60 ° C
Type of battery : Soft Case
Shell material : plastic
Battery capacity : 8000 mAh external standard 20000 mAh
Colour : white
How To Use Our Product Start A Car?
Important Attention : For Car Jump Start
1. For jump start your car,please first checke your car's displacement to make sure it can use.
2. If you car's battery is good and you just want to test this emergency battery.Please do below 2.1 to 3
2.1. Lossen the screws on your car's battery,just need lossen one pole
2.2. Connect red clamp to positive wire,black clamp to negative wire. Please make sure there is enough contact surfaces.
2.3. Plug into battery hole, please plug into the end
3. Prees the round power buttoon,and go to your car to start.
4. After start your car ,please take off the clamp in 30S.
Note: IF You Car's Battery Is Good And You Don't Do The Step 2.1 ,It May Cause Battery Damage
How To Use Our Product Charging/Power Supply To Your 5V Device (Smartphone/Tablet/PSP/Mp3)?
1. Make sure there is at least one power indicator lighting on the power bank
2. Choose a right connector,and connect to the device
3. Connect the power bank(5V/2A will charge quickly)
4. Press the round button
How To Use Our Product's High Quality Led Light Torch Function?
1. Make sure there is at least one power indicator lighting on the power bank
2. Long press the power button about 3 secs
3. Then you can press power button to change mode(SOS/Fast flashing/Lighting)
How To Charge This Power Bank?
You can use car charger or AC charger to charge this jump starter.